DPA Microphones 4099G Clip Microphone for Guitar, dobro,and more ინსტრუმენტული მიკროფონი (გიტარა)

Transducer Type Condenser
Polar Pattern Supercardioid
Principle of Operation Pressure Gradient
Frequency Range 20 Hz to 20 kHz
80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz, Second Order Low-Cut Filter @ 80 Hz (>+/- 2 dB, 20 cm Distance)
Sensitivity 6 mV/Pa; -44.5 dB Reference: 1 V/Pa (Nominal, +/- 3 dB)
Equivalent Noise Level Typ. 23 dB(A) Reference: 20 µPa (Maximum 26 dB(A)) (A-Weighted)
Signal to Noise Ratio 71 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL)
Total Harmonic Distortion (THD) < 1 % up to 123 dB SPL peak
< 1 % up to 120 dB SPL RMS sine
Dynamic Range 100 dB
Maximum SPL 142 dB (Peak Before Clipping)
Output Impedance MicroDot: 30 to 40 Ω,
XLR: 100 Ω
Cable Drive Capability XLR: 984' (300 m)
Output Balance Principle Signal balanced with XLR adapter
CMRR XLR Adapter: > 60 dB at 50 Hz to 15 kHz
Power Supply Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems
48 V phantom power ±4 V with XLR adapter
Current Consumption XLR Adapter: 1.5 mA; 3.5 mA
Connector Microdot
XLR Adapter Included
Compatibility Acoustic Guitars, Mandolins, Ukuleles, Dobros with a body depth between 1.4 and 4.8" (33 and 122 mm)
Polarity Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Operating Temperature -40 to 113°F (-40 to 45°C)
Relative Humidity Up to 90%
Cable Length 6' (1.8 m)
Gooseneck Length: 5.5" (140 mm)
Microphone Length 1.8" (45 mm)
Weight 1.27 oz (36 g)