DPA Microphones 4099G

Transducer Type Condenser
Polar Pattern Supercardioid
Principle of Operation Pressure Gradient
Frequency Range 20 Hz to 20 kHz
80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz, Second Order Low-Cut Filter @ 80 Hz (>+/- 2 dB, 20 cm Distance)
Sensitivity 6 mV/Pa; -44.5 dB Reference: 1 V/Pa (Nominal, +/- 3 dB)
Equivalent Noise Level Typ. 23 dB(A) Reference: 20 µPa (Maximum 26 dB(A)) (A-Weighted)
Signal to Noise Ratio 71 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL)
Total Harmonic Distortion (THD) < 1 % up to 123 dB SPL peak
< 1 % up to 120 dB SPL RMS sine
Dynamic Range 100 dB
Maximum SPL 142 dB (Peak Before Clipping)
Output Impedance MicroDot: 30 to 40 Ω,
XLR: 100 Ω
Cable Drive Capability XLR: 984' (300 m)
Output Balance Principle Signal balanced with XLR adapter
CMRR XLR Adapter: > 60 dB at 50 Hz to 15 kHz
Power Supply Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems
48 V phantom power ±4 V with XLR adapter
Current Consumption XLR Adapter: 1.5 mA; 3.5 mA
Connector Microdot
XLR Adapter Included
Compatibility Acoustic Guitars, Mandolins, Ukuleles, Dobros with a body depth between 1.4 and 4.8" (33 and 122 mm)
Polarity Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Operating Temperature -40 to 113°F (-40 to 45°C)
Relative Humidity Up to 90%
Cable Length 6' (1.8 m)
Gooseneck Length: 5.5" (140 mm)
Microphone Length 1.8" (45 mm)
Weight 1.27 oz (36 g)